MONTHLY INSPECTION & PREVENTATIVE MAINTENANCE PACKAGE

Yacht Safety & Compliance

Ensure your vessel always has the following:
Personal flotation devices (PFDs) for each person onboard.
1 Type IV throwable flotation device
Correct # of fire extinguishers for size of vessel
Day & night visual signaling devices
Sound signaling devices
Additional recommendations will be provided and sourced with client approval

Engine(s) & Generator(s)

Inspect hoses for cracks or loose fittings
Start & run engines & generators
Inspect water pump & heat exchanger for leaks
Check condition of the raw water strainer, baskets, and gaskets
Fluid checks for steering, transmission, engine oil, & coolant.
Check oil pressure and coolant temperature are within normal range
Inspect exhaust hoses & mufflers for leaks/loose fittings
Verify generator voltage and hertz
Exercise thru hulls
Inspect air filters
Test tension on the belts

Electrical System

Inspect Batteries (voltage, signs of leakage or physical damage)
Check DC wiring for loose or corroded connections
Bonding system: check for corroded or loose connections
Inspect all interior, exterior, underwater & navigation lights
Inverters & Chargers for proper operation
Test tension on the belts
Inspect breaker panel

Plumbing

Inspect Fresh Water System: water pump, inspect all facusets & showers for leaks, inspect aerators and shower heads for calcium/limescsale buildup, inspect tank, pipes, and fittings for leaks, check tank level monitor for proper function.
Inspect Black Water System: macerator pump(s), flush all toilets, inspect holding tank filter(s), & inspect hose connections for leaks/signs of wear & tear, & check tank level monitor.
Inspect Grey Water System: check sump pump(s) & inspect filter(s) if equipped.

Bilge Pumps

We will check to make sure your bilge pumps are clean, operating well, and have working alarm circuits.
Test the float switches and ensure your vessel is equipped with a couple of spare pumps and switches.

HVAC

Turn on A/C system
Verify seawater pump is operational & discharging overboard
Inspect strainer
Run system in cooling & heating mode
Record outlet temperature in cooling & heating mode for each unit
Inspect air inlet filter
Run electric heaters if equipped to confirm proper operation

Electronics

Check operation status of: Chartplotter/GPS, radar, VHF radio (confirm if both receiving & transmitting), autopilot (if equipped), AIS (if equipped), depth sounder/fish finder

Steering System

Top off steering/hydraulic fluids.
Exercise rudders with full lock to lock turns.
Inspect hydraulic hoses, rams, & pumps for leaks
Inspect rudder posts for signs of corrosion or leaks

Ground Tackle

Bow rollers, anchor shackle, check for cracks in surrounding structure, & inspect swivel.
Test the windlass: take off cover, lubricate necessary points, and lay eyes on the wire connections. Inspect the chain and its connection to the boat.

Galley

Verify all appliances are operational
Inspect refrigerator(s), ice maker(s), & freezer(s) for ice build up and defrost if necessary
Check garbage disposal (if equipped)

Window/Portholes

Inspect all windows & portholes for signs of leaks
Open & closer all windows & portholes for ease of operation

Canvas/Plastic Enclosures

Inspect canvas for wear & tear
Inspect zippers for ease of operation
Inspect stiching for wear & tear
Inspect windows for scratches for signs of cracking

Hull/Superstructure

Inspect gel coat for any cracks or gouges
Inspect overall condition of gel coat (scratches & oxidation)
Inspect above waterline thru-hulls for signs of cracking